Kia Rio: Description - Battery - Charging System - Engine Electrical System - Kia Rio UB 2012-2025 Service ManualKia Rio: Description

1.
The MF(Maintenance Free) battery is, as the name implies, totally maintenance free and has no removable battery cell caps.
2.
The MF(Maintenance Free) battery does not require water replenishment for the repair.
3.
The battery is completely sealed, except for small vent holes in the cover.



     
After disconnecting then reconnecting the battery negative cable, reset some parts that require the reset procedures.
(Refer to Body Electrical System – "General Information")
[AGM Battery for ISG System]
AGM battery is used for especially heavy load on the vehicle network depending on equipment and requirements. AGM stands for Absorbent Glass Material Battery; that is absorbent glass fibre fleece. AGM batteries are fitted in models with electrical loads/consumers which have a high energy demand.
The constantly increasing energy demand of modern vehicle electrical systems calls for ever more powerful battery solutions.
The power consumption is considerable even when the vehicle is parked.
The somewhat higher price compared with a battery of similar size is fully balanced by the following benefits:
-
Significantly longer service life
-
Increased starting reliability at low temperatures
-
100 % freedom from maintenance
-
Low risk in event of an accident (reduced risk to the environment)

Specifications


Battery
...

Specifications
Battery [Non-ISG type] Item Specification Model type CMF45L-BCI Capacity [20HR/5HR] (AH) 45/36 Cold Cranking Amperage (A) ...

See also:

Seat Heater Switch Removal
1. Disconnect the battery (-) terminal. 2. Remove the console assembly. (Refer to the BD group - "Console") ...

 Brake fluid
Checking the brake/clutch fluid level Check the fluid level in the reservoir periodically. The fluid level should be between MAX and MIN marks on the side of the reservoir. Before removing the r ...

Passenger Airbag (PAB) Module Removal
1. Disconnect the battery negative cable and wait for at least thirty seconds before beginning work. 2. Remove the glove box housing. ...

Copyright www.kirmanual.com 2014-2025