Kia Rio: Hood switch Description

The hood switch is included as the influencing factors in the calculation of the ISG function. If the hood is open, the engine must not be started or stopped by the ISG function for safety reasons.

Seat Belt Switch Installation

1. Install is reverse of removal. ...

Hood switch Inspection

1. Disconnect the hood switch connector (A). 2. Check for continuity between terminals ...

See also:

Photo Sensor (FATC only) Replacement
1. Disconnect the negative (-) battery terminal. 2. With a flat-head screwdriver, remove the photo sensor (A) from the center of defrost no ...

26 Brake Control Solenoid Valve(26/B_VFS) Specifications
Direct control VFS[26/B] ▷ Control type : Normal low type Control Pressure kpa (kgf/cm², psi) 9.81 ~ 500.14 (0.1 ~ 5.1, 1.42 ~ 72.54) Current value(mA ...

Heater & A/C Control Unit (FATC) Schematic Diagrams
...