Kia Rio: Removal - Clutch Release Cylinder - Clutch System - Kia Rio UB 2012-2024 Service ManualKia Rio: Removal

1.
Drain the brake fluid through the bleed plug (A).


2.
Remove the clutch release cylinder assembly (C) after removing the tube (B) and bolts (A-2ea).

Tightening torque:
14.7 ~ 21.6 N.m (1.5 ~ 2.2 kgf.m, 10.9 ~ 15.9 lb-ft)


Components
1. Union bolt 2. Gasket 3. Tube joint 4. Clutch tube 5. Valve plate 6. Valve spring 7. Bleeder screw 8. Release cylinder 9. Return spring 10. Piston 11 ...

Installation
1. Installation is the reverse of removal.    Coat the clutch clevis push r ...

See also:

Multimedia Jack Installation
1. Install the multimedia jack. 2. Connect the multimedia jack connector.    ...

Back-up Lamp Switch Replacement
1. Disconnect the back up lamp switch connector (A). 2. Remove the back up lamp switch (A). 3. ...

Tightening Torques
Item kgf.m N.m lb-ft Positive crankcase ventilation valve installation 0.8 ~ 1.2 7.8 ~ 11.8 5.8 ~ 8.7 Canister installati ...

Copyright © www.kirmanual.com 2014-2024