Kia Rio: Shift Lever Inspection

1.	Check the select cable for proper operation and for damage.

2.	Check the shift cable for proper operation and for damage.

3.	Check the boots for damage.

4.	Check the boots for wear abrasion sticking, restricted movement or damage.

5.	Check for the weak or damaged spring.

Shift Lever Removal

Shift Lever Assembly Replacement 1. Remove the floor Interior console assembly. (Refer to "Interior (Console)" in BD group) ...

Shift Lever Adjustment

1. In neutral position, disjoin select cable (A) from shift lever assembly pin (B). 2. Disconnect select adjuster (A) to an arrow. ...

See also:

Overhead Console Lamp Inspection
Remove the overhead console lamp assembly then check for continuity between terminals. If the continuity is not as specified, replace the overhead console lamp assembly. ...

Power Mosfet (FATC) Replacement
1. Disconnect the negative (-) battery terminal. 2. Disconnect the connector (A) and then remove the power mosfet (B) after loosening the m ...

SRS Control Module (SRSCM) Description
The primary purpose of the Supplemental Restraints System Control Module (SRSCM) is to discriminate between an event that warrants restraint system deployment and an event that does not. The ...

Categories

Copyright © www.kirmanual.com 2014-2026