Kia Rio: Rear Axle Assembly

BJ Boot Replacement

1. Remove the front driveshaft. (Refer to DS group - “Front Driveshaft”) 2. Remove the TJ joint assembly. (Refer to DS group - “TJ Joint”) ...

Rear Hub - Carrier Components

[Drum Type] 1. Rear torsion beam assembly 2. Brake assembly 3. Rear wheel hub assembly 4. Rear brake disc 5. Rear brake disc mounting screw ...

See also:

Side Impact Sensor (SIS) Removal
Pressure Side Impact Sensor    • Removal of the airbag must be performed according to ...

Positive Crankcase Ventilation (PCV) Valve: Removal
1. Disconnect the vapor hose (A) after removing the fixing clip. 2. Remove the PCV valve (B) after unfastening it. ...

Installation
   • Install the component with the specified torques. • ...