Kia Rio: Installation

Inspection

1. Check the bushing for wear. 2. Check the brake pedal for bending or twisting. 3. Check the brake pedal retur ...

Adjustment

Brake Pedal Height and Free Play 1. Disconnect the stop lamp switch connector (A). 2. Adjust the brake pedal height (A) as illustrat ...

See also:

Rear combination lamp Removal
Rear combination lamp (Inside) [4 Door] 1. Disconnect the negative (-) battery terminal. 2. Remove the trunk trim. (Ref ...

Ignition Coil: Specification
Item Specification Primary Coil Resistance (Ω) 0.75 ± 15％ [20°C (68°F)] Secondary Coil Resistance (kΩ) 5.9 ± 15％ ...

Component Location (2)
[4 Door] 1. Back up lamp 2. Turn signal lamp 3. Tail lamp/ Stop lamp 4. Tail lamp 5. Stop lamp 6. Side marker lamp 7. High mounted stop lamp 8. Lic ...