Kia Rio: Seat Heater Switch Installation| 1. |
Install the seat heater switch.
|
| 2. |
Install the console assembly.
|
| 3. |
Connect the battery (-) terminal.
|
Seat Heater Switch Removal
Fuses And RelaysDescription
Purge Control Solenoid Valve (PCSV) is installed on the surge tank and
controls the passage between the canister and the intake manifold. It is a solenoid
valve and is open when the ECM groun ...
SRS Control Module (SRSCM) Installation
1.
Remove the ignition key from the vehicle.
2.
Disconnect the battery negative cable and wait for at least three
minutes before beginning ...
Operation Principle
The CVVT has the mechanism rotating the rotor vane with hydraulic force
generated by the engine oil supplied to the advance or retard chamber in accordance
with the CVVT oil control valve con ...