Kia Rio: 4Door Front Body B
|
|
|
|
| Hood hinge mounting hole (Ø11) |
Fender apron upper member tooling hole (Ø6.6) |
Engine mounting hole (Ø11) |
|
|
|
|
| Transaxle mounting hole (Ø12) |
Engine mounting hole (Ø12) |
Transaxle mounting hole (Ø15) |
|
|
|
|
| Front side member tooling hole (Ø9) |
Front side member tooling hole (Ø6.6) |
Front end module mounting hole (Ø9) |
|
|
||
| Front end module mounting hole (Ø9) |
4Door Front Body A
Hood hinge mounting hole (Ø11)
Fender apron upper member tooling hole (Ø6.6)
Front shock absorber hou ...
4Door Front Body C
Engine mounting hole (Ø11)
Transaxle mounting hole (Ø12)
Engine mounting hole (Ø12)
...
See also:
Air bag collision sensors
(1) SRS control module
(2) Front impact sensor
(3) Side impact sensor
WARNING - Air bag sensors
Do not hit or allow any objects to impact the locations where air bag
or sensors are installed ...
Steering Gear box Components
1. Tie-rod end
2. Lock nut
3. Bellows clip
4. Bellows
5. Tie rod
6. Rack bar
7. Dust packing
8. Dust cap
9. Oil seal
10. Pinion plug
11. Pinion assembl ...
SS-B Solenoid Valve(ON/OFF) Inspection
1.
Turn ignition switch OFF.
2.
Disconnect the solenoid valve connector.
3.
Measure resistance between sensor ...
Copyright © www.kirmanual.com 2014-2024