1. |
Measure the pressure of high pressure line by measuring voltage
output between terminal “1” and “2”.
|
2. |
Inspect the voltage value whether it is sufficient to be regular
value or not.
|
3. |
If the measured voltage value is not within specification, replace
the A/C pressure transducer.
|
Components
1. Brake booster
2. Master cylinder assembly
3. O-ring
...
Power Door Lock Switch Inspection
Driver Door Lock Switch Inspection
1.
Disconnect the negative (-) battery terminal.
2.
Remove the front door trim panel.
(Refer to t ...
Head Lamps Removal
Head Lamp
1.
Disconnect the negative (-) battery terminal.
2.
Remove the radiator grille upper cover (A), after loosening the
mounting ...