Kia Rio: A/C Pressure Transducer Replacement
| 1. |
Disconnect the negative (-) battery terminal.
|
| 2. |
Recover the refrigerant with a recovery/charging station.
|
| 3. |
Disconnect the A/C pressure transducer connector (A).
|
| 4. |
Remove the A/C pressure transducer (A).
|
| 5. |
Install in the reverse order of removal.
|
A/C Pressure Transducer Inspection
1.
Measure the pressure of high pressure line by measuring voltage
output between terminal “1” and “2”.
2.
Inspect the voltage valu ...
Evaporator Temperature Sensor Description
The evaporator temperature sensor will detect the evaporator core temperature
and interrupt compressor relay power in order to prevent evaporator freezing
by excessive cooling.
...
See also:
Trunk Trim Replacement
•
Put on gloves to protect your hands.
•
U ...
SRS Control Module (SRSCM) Removal
1.
Remove the ignition key from the vehicle.
2.
Disconnect the battery negative cable and wait for at least three
minutes before beginning ...
Inside rearview mirror
Adjust the rearview mirror so that the center view through the rear window is
seen. Make this adjustment before you start driving.
Do not place objects in the rear seat which would interfere with y ...
Copyright © www.kirmanual.com 2014-2024