Kia Rio: Accelerator Position Sensor (APS)

Installation

   • Install the component with the specified torques. • ...

Description

Accelerator Position Sensor (APS) is installed on the accelerator pedal module and detects the rotation angle of the accelerator pedal. The APS is one of the most important sensors in engine ...

See also:

Removal
1. Turn ignition switch OFF. 2. Remove the crash pad lower panel. (Refer to the Body group - "Crash pad") ...

Immobilizer Control Unit Installation
1. Install the immobilizer unit. 2. Connector the immobilizer unit. 3. Install the crash pad lower panel. ...

Line Pressure Control Solenoid Valve Description
line pressure control solenoid valve is attached to the valve body. This variable force solenoid valve directly controls the hydraulic pressure inside the line pressure. ...