Kia Rio: Adjustment
Battery Sensor Recalibration Procedure
|
If disconnecting the negative (-) battery cable from the battery during
repair work for the vehicle equipped with Alternator Managing System(AMS) function,
Battery sensor recalibration procedure should be performed after finishing
the repair work.
1. |
Turn the Iginition switch ON and OFF.
|
2. |
Park the vehicle about 4 hours under below states.
A. |
Park the vehicle about 4 hours under below states.
|
B. |
Closing the hood, trunk, and all doors.
|
|
3. |
After 4 hours later, check whether the current datas are displayed
normally or not using GDS.
A. |
Nominal capacity(AMS) = 45Ah [For Non-ISG type]
|
B. |
Nominal capacity(AMS) = 60Ah [For ISG type or Russia region]
|
C. |
State of Charge of Battery(AMS) = (0~100%)
|
D. |
State of Health of Battery(AMS) = (0~100%)
|
|
4. |
After cranking the engine 2 times or more, check "State of Function
of Battery(AMS) =(0~12V)". [For ISG system only]
|
1.
Check for DTCs.
•
If a DTC is ...
See also:
Troubleshooting
...
Installation
Installation is the reverse of removal.
Canister installation bolt/nut:
19.6 ~ 29.4 N.m (2.0 ~ 3.0 kgf.m, 14.5 ~ 21.7 lb-ft)
...
5Door Front Body B
Hood hinge mounting hole (Ø11)
Fender apron upper member tooling hole (Ø6.6)
Engine mounting hole (&O ...