Kia Rio: Ambient Temperature Sensor Inspection
| 1. |
Turn the ignition switch OFF.
|
| 2. |
Disconnect ambient temperature sensor.
|
| 3. |
Check the resistance of ambient temperature sensor between terminal
“+” and “-” whether it is changed by changing of the ambient temperature.
Specification
|
| 4. |
If the measured resistance is not within specification, substitute
with a known-good ambient temperature sensor and check for proper operation.
|
| 5. |
Replace the ambient temperature sensor if it is proved that there
is a problem with the sensor.
|
Ambient Temperature Sensor Description
The ambient temperature sensor is located at the front of the condenser
and detects ambient air temperature. It is a negative type thermistor; resistance
will increase with lower temperature, ...
Ambient Temperature Sensor Replacement
1.
Disconnect the negative (-) battery terminal.
2.
Remove the engine room RH side under cover.
(Refer to EM group - “Engine and Transax ...
See also:
Front Wiper Motor Removal
1.
Loosen the windshield wiper arm nut (A) after removing a wiper
cap (B).
2.
Remove the windshield wiper arm and blade.
...
Condenser Replacement
1.
Recover the refrigerant with a recovery/recycling/charging station.
2.
Disconnect the negative (-) battery terminal.
3.
...
Multimedia Jack Description
The multimedia jack on the console upper cover is for customers who like
to listen to external portable music players like the MP3, iPod and etc., through
the vehicle's sound system when ...
Copyright © www.kirmanual.com 2014-2024