Kia Rio: Anchor Pretensioner (APT) Description
Front seat belt anchor pretensioner operates as well as belt pretensioner
at the same time If it gets into its deploy condition after a collision. It
is located at near anchor on front seat and it is an equipment to make up for
the existing short stroke. Front seat belt anchor pretensioner is an auxiliary
equipment to prevent the driver and passenger from breaking away doubly as seat
belt is being pulled toward anchor side after a collision.
Never measure resistance of anchor pretensioner directly, current
of measuring device may cause unexpected airbag deploy.
|
Installation
1.
Remove the ignition key from the vehicle.
2.
Disconnect the battery negative cable and wait for at least thirty
seconds.
...
See also:
Front Hub / Knuckle Reassembly
1.
Install the hub bearing to the knuckle assembly.
(1)
Lay the knuckle assembly (A) on press.
(2)
...
Component Replacement After Deployment
Before doing any SRS repairs, use the GDS Pro to check for DTCs.
Refer to the Diagnostic Trouble Code list for repairing ...
Troubleshooting Guide
Before Thinking The Product Has Malfunctioned
1.
Errors which occur during the operation or installation of the
device may be mistaken as a malfunction of the actual de ...
Copyright © www.kirmanual.com 2014-2024