1. |
Remove the antenna jack from the audio unit and antenna.
|
2. |
Check for continuity between the center poles of antenna cable.
|
3. |
Check for continuity between the outer poles of antenna cable.
There should be continuity.
|
4. |
If there is no continuity, replace the antenna cable.
|
5. |
Check for continuity between the center pole (A) and outer pole
(B) of antenna cable. There should be no continuity.
|
6. |
If there is continuity, replace the antenna cable.
|
Start/Stop Button Component
...
4Door Under Body
Projected Dimensions
Front side member tooling hole (Ø6.6)
Front side member tooling hole (Ø6.6)
...
A/C Pressure Transducer Inspection
1.
Measure the pressure of high pressure line by measuring voltage
output between terminal “1” and “2”.
2.
Inspect the voltage valu ...