Kia Rio: Auto Defogging Sensor (FATC only) Description

The Auto Defogging Sensor is installed on the front windshild glass. The Auto Defogging Sensor senses moisture on the windshild. The air conditioner control module receives the signal from the sensor and eliminates fog by controlling the intake actuator, A/C, auto defogging actuator, blower motor rpm, and mode actuator.

Ambient Temperature Sensor Replacement

1. Disconnect the negative (-) battery terminal. 2. Remove the engine room RH side under cover. (Refer to EM group - “Engine and Transax ...

Auto Defogging Sensor (FATC only) Inspection

1. Press the MODE switch more then 4 times within 2 seconds while pressing the OFF switch. Display Fail description 00 ...

See also:

Lubricants
Items  Specified lubricants  Quantity Input shaft spline CASMOLY L9508 0.2g Clutch release cylinder assembly Brake flu ...

Removal
Rear Disc Brake Type    The parking brake cables must not be bent or distorted. This will lead to stiff operat ...

Ambient Temperature Sensor Description
The ambient temperature sensor is located at the front of the condenser and detects ambient air temperature. It is a negative type thermistor; resistance will increase with lower temperature, ...