1. |
Remove the auto defogging sensor cover (A).
|
2. |
Disconnect the connector (B) and then remove the auto defogging
sensor (C).
|
3. |
Install in the reverse order of removal.
|
Steering Column and Shaft Adjustment
After or before servicing the EPS system, perform the troubleshooting
and test procedure as follows. Compare the system condition with normal condition
in the table below and if abnormal symp ...
Measuring Actual Dimensions
1.
These dimensions indicate the actual linear distance between measurement
points, and are used as the reference dimensions when a tracking gauge
is used for measurem ...
Components
1. Brake booster
2. Master cylinder assembly
3. O-ring
...