|
1. |
Disconnect the negative (-) battery terminal.
|
2. |
Remove the crash pad center fascia panel (A).
(Refer to the BD group - "Crash pad")
|
3. |
Disconnect the center fascia panel connectors (A).
|
4. |
Remove the AVN head unit (A) after loosening the mounting screws.
|
5. |
Remove the AVN head unit connectors and cables.
|
1. |
Remove the rear roof trim.
(Refer to the BD group - "Roof trim")
|
2. |
Disconnect the antenna cable and the connector (A).
|
3. |
Remove the roof antenna after removing a nut (A).
|
Compressor Installation
1.
Make sure of the length of compressor mounting bolts, and then
tighten it with the specified tightening order.
Tightening torque :
...
Tire pressure monitoring system
(1) Low tire pressure telltale / TPMS malfunction indicator
Each tire, including the spare (if provided), should be checked monthly when
cold and inflated to the inflation pressure recommended by ...
Immobilizer Control Unit Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the crash pad lower panel.
(Refer to the BD group - "Crash pad")
...