Kia Rio: Back-up Lamp Switch Description

Back up lamp switch is pushed by the reverse lug sliding when select arm, and switches the back up lamp.

Shift Lever Adjustment

1. In neutral position, disjoin select cable (A) from shift lever assembly pin (B). 2. Disconnect select adjuster (A) to an arrow. ...

Back-up Lamp Switch Specifications

1. Working voltage: DC 10~15V 2. Operating force: 3.0kg Max. 3. Voltage drop: - 0.4V 4. ...

See also:

Transaxle Control Module (TCM) Terminal Function
Connector [EGGG-AA] Pin Description Pin Description 22 Shift solenoid D (VFS-OD) 73 Inhibitor switch signal "S4" ...

26 Brake Control Solenoid Valve(26/B_VFS) Inspection
1. Turn ignition switch OFF. 2. Disconnect the solenoid valve connector. 3. Measure resistance between sensor ...

High Mounted stop lamp Installation
[4 Door] 1. Install the high mounted stop lamp assembly. 2. Install the package tray trim. 3. Connect the n ...