1. |
Disconnect the back up lamp switch connector (A).
|
2. |
Check the continuity between no. 1 and 2 terminals of backup lamp
switch. When the shift lever is in reverse, there should be continuity.
|
3. |
If necessary, repair or replace the backup lamp switch.
|
Precautions For Catalytic Converter
If a large amount of unburned gasoline flows into the converter,
it may overheat and create a fire hazard. To preve ...
Cowl Top Cover Replacement
1.
Remove the wiper arm cover (B).
2.
After loosening the mounting nuts, then remove the wiper arm (A).
Tightening to ...
Installation
1.
Install the back view camera.
2.
Install the tailgate trim.
...