Kia Rio: Back-up Lamp Switch Replacement - Manual Transaxle Components - Manual Transaxle System - Kia Rio UB 2012-2024 Service ManualKia Rio: Back-up Lamp Switch Replacement

1.
Disconnect the back up lamp switch connector (A).


2.
Remove the back up lamp switch (A).


3.
Replace a new one and install the back up lamp switch.

Tightening torque:
29.4 ~ 34.3 N.m (3.0 ~ 3.5 kgf.m, 21.7 ~ 25.3 lb-ft)

Back-up Lamp Switch Inspection
1. Disconnect the back up lamp switch connector (A). 2. Check the continuity between no. 1 and 2 terminals of backup lamp switch. W ...

Automatic Transaxle System
...

See also:

Roll Over Valve (ROV): Repair procedures
Removal 1. Remove the fuel pump. (Refer to Engine Control/Fuel System - “Fuel Pump”) 2. Remove the roll over valve (A) after releasing ...

Description
Continuous Variable Valve Timing (CVVT) system advances or retards the valve timing of the intake and exhaust valve in accordance with the ECM control signal which is calculated by the engine ...

Front Seat Components
1 . Headrest 2 . Headrest guide 3 . Front seat back cover 4 . Front seat back warmer 5 . Front seat back pad 6 . Front seat back silener cloth 7 . Front seat back frame as ...

Copyright © www.kirmanual.com 2014-2024