Kia Rio: BJ Boot Components

Dynamic Damper Installation

1. Apply soap powder on the shaft to prevent being damaged between the shaft spline and the dynamic damper. 2. Install the dynamic damper. ...

BJ Boot Replacement

1. Remove the front driveshaft. (Refer to DS group - “Front Driveshaft”) 2. Remove the TJ joint assembly. (Refer to DS group - “TJ Joint”) ...

See also:

Inspection
Connecting Rod And Crankshaft 1. Check the connecting rod end play. Using feeler gauge, measure the end play while moving the connecting rod back and f ...

Head lamp leveling Actuator Removal
1. Disconnect the negative (-) battery terminal. 2. Remove the head lamp assembly (Refer to the head lamp). 3. ...

Removal
1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Disconnect the purge control solenoid valve connector (A) ...