1. |
Remove the front driveshaft. (Refer to DS group - “Front Driveshaft”)
|
2. |
Remove the TJ joint assembly. (Refer to DS group - “TJ Joint”)
|
3. |
Remove the Dynamic damper. (Refer to DS group - “Dynamic Damper”)
|
4. |
Using a plier or flat-tipped (-) screwdriver, remove the BJ boot
bands (A).
|
5. |
Remove the BJ boot.
|
6. |
Install in the reverse order of removal.
|
Warning / Caution Label Locations
1. Fan caution
2. Radiator cap caution
3. Battery caution
...
Engine Oil: Inspection
1.
Check the engine oil quality.
Check the oil deterioration, entry of water, discoloring of thinning.
If the quality is visibly poor, replace the oil.
...
Components
1. Guide rod bolt
2. Bleed screw
3. Caliper carrier
4. Caliper body
5. Brake pad
6. Pad retainer
...