Kia Rio: Blower Unit Replacement
| 1. |
Remove the heater & blower unit.
(Refer to HA group - "Heater Unit")
|
| 2. |
Separate the blower unit from the heater unit after loosening
the screws.
|
| 3. |
Install in the reverse order of removal.
|
Blower Unit Components
1. Blower Motor
2. Blower Fan
3. Clamp
4. NVH Pad
5. Connection Case
6. Cluster Ionizer (FATC only)
7. Intake Case (Left)
8. Intake Seal
9. NVH Pad
10. Intake ...
Blower Motor Inspection
1.
Connect the battery voltage and check the blower motor rotation.
2.
If the blower motor does not operate well, substitute with a know ...
See also:
Smart key unit Circuit diagram
No.
Connector A(26 pins)
No.
Connector B(16 pins)
No.
Connector C(22 pins)
1
VBAT_LOAD
1
C_CAN_L
1
O_S ...
Emergency Towing
There are three popular methods of towing a vehicle :
-
The operator loads the vehicle on the back of truck. This is best
way of transporting the vehicle.
...
Parking brake
Checking the parking brake
Check the stroke of the parking brake by counting the number of “clicks’’ heard
while fully applying it from the released position. Also, the parking brake alone
shou ...
Copyright © www.kirmanual.com 2014-2024