1. |
Connect a circuit tester to the connector of stop lamp switch,
and check whether or not there is continuity when the plunger of the
stop lamp switch is pushed in and when it is released.
|
2. |
The stop lamp switch is in good condition if there is no continuity
when plunger (A) is pushed.
|
Circuit Diagram
(M/T)
(A/T)
...
Manual transaxle
Manual transaxle operation
The manual transaxle has 6 forward gears.
This shift pattern is imprinted on the shift knob. The transaxle is fully synchronized
in all forward gears so shifting to ei ...
Head lamp leveling Actuator Installation
1.
Install the head lamp leveling actuator by turning the adjusting
gear.
2.
Install the head lamp assembly.
3.
...