Kia Rio: Circuit Diagram

Wave Form

...

Inspection

1. Check the signal waveform of the CMPS and CKPS using the GDS. Specification: Refer to “Wave Form” ...

See also:

Components
[Front] (5 Door, 4 Door) 1. Front seat belt 2. Height adjust 3. Front seat belt anchor pretensioner (NA : North america) [Rear] ...

Seat Heater Inspection
Driver seat and Passenger seat 1. Check for continuity and measure the resistance between terminals. [Cushion] Pin No. ...

Overdrive Clutch Control Solenoid Valve(OD/C_VFS) Inspection
1. Turn ignition switch OFF. 2. Disconnect the solenoid valve connector. 3. Measure resistance between sensor ...