Kia Rio: Circuit Diagram

Signal Waveform

...

Inspection

1. Connect the GDS on the Data Link Connector (DLC). 2. Measure the output voltage of the RPS at idle and various engine speed. ...

See also:

Coolant: Refilling And Bleeding
   Never remove the radiator cap when the engine is hot. Serious scalding could be caused by hot fluid under high pressure ...

Cruise Control Switch: Removal
1. Disconnect the battery (-) terminal. 2. Remove the air-bag module from the steering wheel. (Refer to Restraint - "Driver Airbag (DA ...

Roll Over Valve (ROV): Repair procedures
Removal 1. Remove the fuel pump. (Refer to Engine Control/Fuel System - “Fuel Pump”) 2. Remove the roll over valve (A) after releasing ...