Kia Rio: Climate control air filter - Parking brake - Maintenance - Kia Rio UB 2012-2024 Owners ManualKia Rio: Climate control air filter

Filter inspection

The climate control air filter should be replaced according to the Maintenance Schedule. If the vehicle is operated in severely air-polluted cities or on dusty rough roads for a long period, it should be inspected more frequently and replaced earlier.

When you replace the climate control air filter, replace it performing the following procedure, and be careful to avoid damaging other components.

Filter replacement


Filter replacement

1. Open the glove box.

2. Remove the climate control air filter cover while pressing the lock on the


2. Remove the climate control air filter cover while pressing the lock on the right side of the cover.

3. Push the right side of the climate control air filter and pull the climate control air filter out.

4. Replace the climate control air filter.


4. Replace the climate control air filter.

5. Reassemble in the reverse order of disassembly.

When replacing the climate control air filter, install it properly. Otherwise, the system may produce noise and the effectiveness of the filter may be reduced.

Parking brake
Checking the parking brake Check the stroke of the parking brake by counting the number of “clicks’’ heard while fully applying it from the released position. Also, the parking brake alone shou ...

Wiper blades
Blade inspection Commercial hot waxes applied by automatic car washes have been known to make the windshield difficult to clean. Contamination of either the windshield or the wiper blades with f ...

See also:

TPMS Sensor Diagnosis procedure by using diagnostic device
As manual for diagnosis methods by using diagnosis device, the main contents are as follows: 1. Connect self-diagnosis connector(16pins) located in the lower of driv ...

Brake Booster Vacuum Pressure Sensor: Description
In order to ensure adequate brake power assistance in every situation, the brake booster is equipped with a partial vacuum sensor. The brake booster vacuum pressure sensor is located beside t ...

Components Location
1. Fuel Tank 2. Fuel Pump 3. Fuel Filter 4. Fuel Pressure Regulator 5. Canister 6. Fuel Tank Band 7. Fuel Filler Hose 8. Ventilation Hose 9. Vapor Tube 10 ...

Copyright © www.kirmanual.com 2014-2024