Kia Rio: Cluster Ionizer (FATC only) Description

The cluster ionizer helps to clean up odors in the vehicle or from the air-conditioner system.

When the ignition switch ON, the inoizer runs a "CLEAN" mode and then a "ION" mode, switching every about 15 minutes.

In the “CLEAN” mode, the cluster ionizer generates negative and positive ions to help clean smells from the air

In the "ION" mode, the cluster generates negative ions and cleans inside air of a vehicle.

Auto Defogging Sensor (FATC only) Replacement

1. Remove the auto defogging sensor cover (A). 2. Disconnect the connector (B) and then remove the auto defogging sensor (C). ...

Cluster Ionizer (FATC only) Inspection

1. Press the MODE switch more then 4 times within 2 seconds while pressing the OFF switch. Display Fail description 00 ...

See also:

Input/ Output Description
Function I/O Connector No Description Active Remark Power B+ A1 Supply power to BCM Power 　 ...

4Door Front Body B
Hood hinge mounting hole (Ø11) Fender apron upper member tooling hole (Ø6.6) Engine mounting hole (&O ...

Line Pressure Control Solenoid Valve Specifications
Direct control VFS[LINE Pressure] ▷ Control type : Normal low type Control Pressure kpa (kgf/cm², psi) 500.14 ~ 9.81 (5.1 ~ 0.1,72.54 ~ 1.42) Current ...