Before doing any SRS repairs, use the GDS Pro to check for DTCs.
Refer to the Diagnostic Trouble Code list for repairing of the related
DTCs. Check and repair all DTC's before replacing a faulty or one whose
airbag system has been deployed SRSCM.
|
- |
SRSCM
|
- |
Deployed airbag(s)
|
- |
Seat belt pretensioner(s)
|
- |
Anchor pretensioner(s)
|
- |
Front impact sensors
|
- |
SRS wiring harnesses
|
- |
Inspect the clock spring for heat damage.
If any damage found, replace the clock spring.
|
- |
SRSCM
|
- |
Deployed airbag(s)
|
- |
Side impact sensor(s) for the deployed side(s)
|
- |
SRS wiring harnesses
|
- |
Turn the ignition switch ON; the SRS indicator should come on
for about six seconds and then go off.
|
Component Location (1)
1. Interior antenna 1
2. Interior antenna 2
3. Door outside handle
4. Buzzer
5. Smart key unit
6. SSB (Start Stop Button)
...
Water pump: Inspection
1.
Check each part for cracks, damage or wear, and replace the coolant
pump assembly if necessary.
2.
Check the bearing for damage, abnorma ...
Power Door Lock Actuators Inspection
Front Door Lock Actuator and Switch
1.
Remove the front door trim.
(Refer to the Body group - Front door)
2.
Remove the front door l ...