1. |
Recover the refrigerant with a recovery/recycling/charging station.
|
2. |
Disconnect the negative (-) battery terminal.
|
3. |
Remove the front bumper.
(Refer to BD group - “Front Bumper”)
|
4. |
Remove the air guard (A).
|
5. |
Disconnect the discharge line (A) and liquid line (B) from the
condenser.
|
6. |
Remove the condenser (A) from the radiator.
|
7. |
Install in the reverse order of removal.
|
Wave Form
...
Removal
1.
Turn the ignition switch OFF and disconnect the battery negative
(-) cable.
2.
Disconnect the connector (A), and then remove the sensor ...
Power Mosfet (FATC) Inspection
1.
Turn the ignition switch ON.
2.
Manually operate the control switch and measure the voltage of
blower motor.
3.
...