Kia Rio: DC/DC Converter: Removal and Installation
| 1. |
Disconnect the battery negative terminal.
|
| 2. |
Remove the glove box housing. (Refer to BD group)
|
| 3. |
Disconnect the connector (A) and then remove the DC/DC converter
(B).
|
| 4. |
Installation is reverse order of removal.
|
DC/DC Converter: Circuit Diagram
In the ISG mode, if the power of an audio system turnsOFF by drawdown
while “Auto Starting” or “Idle Starting”functi ...
ISG OFF Switch: Description
The ISG OFF switch on the crash pad lower panel can be used to deactivate
the ISG function.
...
See also:
Owner maintenance
The following lists are vehicle checks and inspections that should be performed
by the owner or an authorized Kia dealer at the frequencies indicated to help ensure
safe, dependable operation of y ...
Input/ Output Description
Function
I/O
Connector No
Description
Active
Remark
Power
B+
A1
Supply power to BCM
Power
...
Checking Cables And Wires
1.
Check the terminal for tightness.
2.
Check terminals and wires for corrosion from battery electrolyte,
etc.
3.
...
Copyright © www.kirmanual.com 2014-2024