Kia Rio: Description
Crankshaft Position Sensor (CKPS) detects the crankshaft position and
is one of the most important sensors of the engine control system. If there
is no CKPS signal input, the engine may stop because of CKPS signal missing.
This sensor is installed in ladder frame and generates alternating current
by magnetic flux field which is made by the sensor and the target wheel when
the engine rotates. The target wheel consists of 58 slots and 2 missing slots
on 360 CA (Crank Angle).
Specification
Item
Specification
Coil Resistance (Ω)
774 ~ 946 [20°C (68°F)]
...
See also:
Oil Pump Components
1. Oil pump cover
2. Oil pump housing
3. Driven gear
4. Drive gear
5. Oil seal
6. Bushing-housing
7. Reaction shaft
8. Bushing-reaction shaft
9. Sleeve
10 ...
License Lamp Installation
1.
Install the bulb.
2.
Connect the lens and license lamp.
...
Multimedia Jack Troubleshooting
Symptom
Suspected area
Repairment
Pressing power switch does not turn on system
Radio receiver power source circuit
R-1
LCD module
R ...
Copyright © www.kirmanual.com 2014-2024