1. |
Fix the steering gear box assembly (A) on the vice.
|
2. |
Remove the bellows clip (A) in the direction of the arrow. (The
left and right same work.)
|
3. |
Give space to bellows bend (B) by using the ring pliers (A). (The
left and right same work)
|
4. |
After making the space to the bellows and tie-rod end contact
part by using the (-) driver, remove the bellows (A) in the direction
of the arrow.(The left and right same work)
|
5. |
Remove the tie-rod & tie-rod end assembly (A).(The left and right
same work)
|
6. |
After fixing the yoke plug (A), remove the rock nut (B).
|
7. |
Remove the yoke plug (A).
|
8. |
Remove the yoke spring (A) and leaf spring (B).
|
9. |
Remove the support yoke assembly (A) from the inner lack hosing.
|
10. |
Remove the dust packing & cap (A).
|
11. |
Remove the top plug (A) by using the spanner.
|
12. |
Remove the pinion assembly (A).
|
13. |
Remove the rack bar (A) in the direction of the arrow.
|
Rear Wheel Alignment
When using a commercially available computerized wheel alignment
equipment to inspect the rear wheel alignment, always p ...
Specifications
Purge Control Solenoid Valve (PCSV)
▷ Specification
Item
Specification
Coil Resistance (Ω)
22.0 ~ 26.0 [20°C(68°F)]
Fuel Ta ...
Storage compartment
These compartments can be used to store small items.
To avoid possible theft, do not leave valuables in the storage compartment. Always
keep the storage compartment covers closed while driving. Do ...