Driver Airbag (DAB) |
Never attempt to measure the circuit resistance of the airbag
module (squib) even if you are using the specified tester. If the circuit
resistance is measured with a tester, accidental airbag deployment will
result in serious personal injury.
|
1. |
Check pad cover for dents, cracks or deformities.
|
2. |
Check the airbag module for denting, cracking or deformation.
|
3. |
Check hooks and connectors for damage, terminals for deformities,
and harness for binds.
|
4. |
Check airbag inflator case for dents, cracks or deformities.
|
5. |
Install the airbag module to the steering wheel to check for fit
or alignment with the wheel.
|
1. |
If, as a result of the following checks, even one abnormal point
is discovered, replace the clock spring with a new one.
|
2. |
Check connectors and protective tube for damage, and terminals
for deformities.
|
Windshield defrosting and defogging
WARNING - Windshield heating
Do not use the or
position during cooling operation
in extremely humid weather. The difference between the temperature of the outside
air and the windshield could ...
Photo Sensor (FATC only) Replacement
1.
Disconnect the negative (-) battery terminal.
2.
With a flat-head screwdriver, remove the photo sensor (A) from
the center of defrost no ...
Weight Classification System (WCS) Installation
WCS(Weight Classification System) is utilizing a robust weight
measuring technology. Thus, if any of the following condi ...