1. |
Set the front tires straight-ahead before removing the steering
wheel.
|
2. |
Disconnect the battery negative cable.
|
3. |
Release the connector locking pin, then disconnect the driver
airbag module connector (B).
|
4. |
Remove the steering wheel and steering wheel column shroud. (Refer
to the Steering System group - "Steering Column and Shaft")
|
5. |
Disconnect the clock spring and horn connector (A), then remove
the clock spring.
|
Line Pressure Control Solenoid Valve Description
line pressure control solenoid valve is attached to the valve body. This
variable force solenoid valve directly controls the hydraulic pressure inside
the line pressure.
...
Brake Booster Vacuum Pressure Sensor: Inspection
1.
Check installation status of BBVPS and Vacuum hose or damage of
vacuum hose.
2.
Connect GDS to DLC (Data Link Cable).
...