1. |
Disconnect the negative (-) battery terminal.
|
2. |
Disconnect the Electric Oil Pump (EOP) connector (A).
|
3. |
Remove the under cover (A) after lifting the vehicle with lift.
|
4. |
Remove the Electric Oil Pump (B) after removing the bolts (A-4ea).
|
Ambient Temperature Sensor Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect ambient temperature sensor.
3.
Check the resistance of ambient t ...
Special driving conditions
Hazardous driving conditions
When hazardous driving conditions are encountered such as water, snow, ice, mud,
sand, or similar hazards, follow these suggestions:
Drive cautiously and allow extr ...
Inspection
1.
After disconnecting the vapor hose from the PCV valve, remove
the PCV valve.
2.
Reconnect the PCV valve to the vapor hose.
...