Kia Rio: ESC Control Module Installation
| 1. |
Installation is the reverse of removal.
|
| 2. |
Tighten the HECU mounting bolts and nuts to the specified torque.
|
| 3. |
After installation, bleed the brake system.
(Refer to ABS bleeding)
|
ESC Control Module Removal
1.
Turn ignition switch OFF.
2.
Pull up the lock of the HECU connector (A), and then disconnect
the connector.
...
Front Wheel Speed Sensor Components
1. Front wheel speed sensor connector
2. Front wheel speed sensor
...
See also:
Blower Unit Components
1. Blower Motor
2. Blower Fan
3. Clamp
4. NVH Pad
5. Connection Case
6. Cluster Ionizer (FATC only)
7. Intake Case (Left)
8. Intake Seal
9. NVH Pad
10. Intake ...
SS-B Solenoid Valve(ON/OFF) Removal
1.
Remove the battery and the battery tray.
(Refer to "Charging system" in EE group.)
2.
Remove the under cover (A).
...
Back-up Lamp Switch Specifications
1.
Working voltage: DC 10~15V
2.
Operating force: 3.0kg Max.
3.
Voltage drop: - 0.4V
4. ...
Copyright © www.kirmanual.com 2014-2024