1. |
Turn ignition switch OFF.
|
2. |
Pull up the lock of the HECU connector (A), and then disconnect
the connector.
|
3. |
Disconnect the brake tubes from the HECU by unlocking the nuts
counterclockwise with a spanner.
|
4. |
Loosen the HECU bracket nuts (A), then remove HECU and bracket.
|
5. |
Remove the 3 bolts, and then remove the bracket from HECU.
|
Front Stabilizer Link Inpesction
Check the front stabilizer link ball joint for damage.
-
Torn boot
-
Opened boot
-
Displaced ring
...
Starter: Installation
1.
Install in the reverse order of removal.
Starter installation bolt:
49.0 ~ 63.7 N.m (5.0 ~ 6.5 kgf.m, 36.2 ~ 47.0 lb-ft)
...
Lubricants
Item
Specified lubricant
Quantity
Transaxle fluid
ATF SP-Ⅳ or equivalent
7.3L (1.93 U.S gal., 7.71 U.S.qt., 6.42 Imp.q ...