Kia Rio: Fail-Safe Mode
| Item |
Fail-Safe |
|
| ETC Motor |
Throttle valve stuck at 7° |
|
| TPS |
TPS 1 fault |
ECM looks at TPS2 |
| TPS 2 fault |
ECM looks at TPS1 |
|
| TPS 1,2 fault |
Throttle valve stuck at 7° |
|
| APS |
APS 1 fault |
ECM looks at APS 2 |
| APS 2 fault |
ECM looks at APS 1 |
|
| APS 1,2 fault |
Engine idle state |
|
When throttle value is stuck at 7°, engine speed is limited at
below 1,500rpm and vehicle speed at maximum 40 ~ 50 km/h (25 ~ 31 mph)
|
See also:
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the crash pad lower panel.
(Refer to the BD group - "Crash pad")
...
Windshield Wiper-Washer Switch Installation
1.
Install the wiper switch.
2.
Install the steering column upper and lower shrouds.
...
Passenger Airbag (PAB) ModuleInstallation
1.
Remove the ignition key from the vehicle.
2.
Disconnect the battery negative cable from battery and wait for
at least thirty seconds bef ...
Copyright © www.kirmanual.com 2014-2024