1. |
Open the fuel filler door, and then remove the filler-neck assembly
mounting screws (A).
|
2. |
Disconnect the fuel filler hose (A) and the vapor hose (B).
|
3. |
Remove the filler-neck assembly from the vehicle after removing
the bracket mounting bolt (A).
|
TJ Joint Inspection
1.
Check the spider assembly for roller rotation, wear or corrosion.
2.
Check the groove inside the joint case for wear or corrosion
...
Head Lamps Adjustment
Head Lamp Aiming Instructions
The head lamps should be aimed with the proper beam-setting equipment,
and in accordance with the equipment manufacturer's instructions.
...
Smart key unit Installation
Smart Key Unit
1.
Install the smart key unit.
2.
Install the smart key unit mounting nuts and connector.
3.
...