1. |
Disconnect the negative (-) battery terminal.
|
2. |
Remove the glove box housing.
(Refer to BD group - “Crash pad”)
|
3. |
Remove the cluster ionizer.
(Refer to HA group - “Cluster Ionizer”)
|
4. |
Disconnect the connector (A) and then remove the foot actuator
(B) after loosening the mounting screws.
|
5. |
Install in the reverse order of removal.
|
Tail Gate Adjustment
1.
After loosening the tail gate hinge (A) mounting bolt, adjust
the tail gate by moving it up or down, or right or left.
2.
Adjust the tai ...
AVN Head Unit Removal
AVN Head Unit
•
Take care not to scratch the center fascia panel and related
parts.
...
Installation
1.
Installation is the reverse of removal.
If the oil seal on the transaxle case side is da ...