1. |
Disconnect the negative (-) battery terminal.
|
2. |
Disconnect the fog lamp connector (A).
|
3. |
Remove the fog lamp bulb (A) after turning in the counterclockwise
direction.
|
4. |
Remove the fog lamp assembly (A) with loosening 3 screws.
|
Inspection
Cylinder Head
1.
Inspect for flatness.
Using a precision straight edge and feeler gauge, measure the
surface the contacting the cylinder block and the manifolds ...
Smart key unit Circuit diagram
No.
Connector A(26 pins)
No.
Connector B(16 pins)
No.
Connector C(22 pins)
1
VBAT_LOAD
1
C_CAN_L
1
O_S ...
Auto Defogging Sensor (FATC only) Description
The Auto Defogging Sensor is installed on the front windshild glass. The
Auto Defogging Sensor senses moisture on the windshild. The air conditioner
control module receives the signal from th ...