|
1. |
Install the new front impact sensor.
|
2. |
Tighten the front impact sensor mounting nut.
|
3. |
Connect the front impact sensor connector.
|
4. |
Left side - Install the air duct assembly.
Right side - Install the washer reservoir.
(Refer to the Body Electrical group - "Washer motor")
|
5. |
Install the front wheel guard.
|
6. |
Reconnect the battery negative cable.
|
7. |
After installing the Front Impact Sensor, confirm proper system
operation:
|
Vehicle parasitic current inspection
1.
Turn the all electric devices OFF, and then turn the ignition
switch OFF.
2.
Close all doors except the engine hood, and then lock all d ...
Head Lamps Component
1. Head lamp assembly lens & housing
2. Head lamp bulb (Low)
3. Head lamp bulb (High)
4. Dust cover
5. Turn signal lamp bulb
6. Socket
...
Parking Brake Adjustment
•
Re-setting of the parking brake is necessary after overhauling
the caliper body, or if ...