1. |
Remove the front wheel & tire.
|
2. |
Loosen the nut and remove the lower arm (A).
|
3. |
Remove the lower arm (C) by loosening the bolt (A) and (B).
|
4. |
Installation is the reverse of removal.
|
DC/DC Converter: Removal and Installation
1.
Disconnect the battery negative terminal.
Tightening torque
Without battery sensor :
7.8 ~ 9.8 N.m (0.8 ~ 1.0 kgf.m, 5.8 ~ ...
SS-B Solenoid Valve(ON/OFF) Circuit Diagram
...
Power Window Switch Inspection
Power Window Main Switch Inspection
1.
Disconnect the negative (-) battery terminal.
2.
Remove the front door trim panel.
(Refer to ...