Kia Rio: Front Stabilizer Link Replacement - Front Suspension System - Suspension System - Kia Rio UB 2012-2024 Service ManualKia Rio: Front Stabilizer Link Replacement

1.
Remove the rear wheel & tire

Tightening torque :
88.3 ~ 107.9N.m(9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)


2.
Remove the stabilizer link (A) loosening the nut (B) and (C).

Tightening torque :
98.1 ~ 117.7N.m(10.0 ~ 12.0kgf.m, 72.3 ~ 86.8lb-ft)


Front Lower Arm Inspection
1. Check the bushing for wear and deterioration. 2. Check the lower arm for deformation. 3. Check the all bolts ...

Front Stabilizer Link Inpesction
Check the front stabilizer link ball joint for damage. - ­ Torn boot - ­ Opened boot - ­ Displaced ring ...

See also:

SS-A Solenoid Valve(ON/OFF) Circuit Diagram
...

Components Location
1. Purge control solenoid valve (PCSV) 2. Vapor line 3. ORVR valve 4. Fuel tank air filter 5. Canister close valve (CCV) 6. Canister 7. Fuel tank pressure sensor ( ...

Roll Over Valve (ROV): Repair procedures
Removal 1. Remove the fuel pump. (Refer to Engine Control/Fuel System - “Fuel Pump”) 2. Remove the roll over valve (A) after releasing ...

Copyright © www.kirmanual.com 2014-2024