Kia Rio: Front Washer Motor Removal
|
| 1. |
Disconnect the negative (-) battery terminal.
|
| 2. |
Remove the front wheel guard (RH).
(Refer to the BD group - "Front wheel guard")
|
| 3. |
Remove the washer hose and disconnect the washer motor connector
(A).
|
| 4. |
Remove the washer reservoir (A) after removing 2 bolts.
|
Front Washer Motor Inspection
Front Washer Motor
1.
With the washer motor connected to the reservoir tank, fill the
reservoir tank with water.
&nb ...
Front Washer Motor Installation
1.
Install the washer reservoir.
Before installing the pump motor, check ...
See also:
AGM Battery: Inspection
Battery Diagnostic Flow
Vehicle parasitic current inspection
1.
Turn all the electric devices OFF, and then turn the ignition
switch OFF.
...
Clutch & Brake
The 6-spd automatic transaxle consists of an overdrive clutch (OD/C),
a one-way clutch (OWC), a lower and reverse brake (LR/B), an underdrive brake
(UD/B), a 26 brake (26/B), and a 35R clutch ...
Dynamic Damper Replacement
1.
Remove the front driveshaft. (Refer to DS group - “Front Driveshaft”)
2.
Remove the TJ joint assembly. (Refer to DS group - “TJ joint”)
...
Copyright © www.kirmanual.com 2014-2024