1. |
Install the wiper motor.
|
2. |
Install the crank arm.
|
3. |
Install the lower and upper linkage to the wiper motor crank arm.
|
4. |
Install the wiper motor and linkage assembly and then connect
the wiper motor connector.
|
5. |
Install the cowl top cover.
|
6. |
Install the windshield wiper arm and blade.
|
7. |
Install the wiper arm and blade to the auto stop position.
A : Glass marking point (Driver)
B : Glass marking point (Assistant)
|
8. |
Set the cowl top cover on the specified spray position.
|
Components
1. Cylinder block
2. Ladder frame
3. Crankshaft
4. Crankshaft upper bearing
5. Crankshaft lower bearing
6. Thrust bearing
7. Main bearing cap
8. Adapter plate
...
Specifications
Battery [Non-ISG type]
Item
Specification
Model type
CMF45L-BCI
Capacity [20HR/5HR] (AH)
45/36
Cold Cranking Amperage (A)
...
Hazard Lamp Switch Inspection
1.
Operate the switch and check for continuity between terminals.
...