Kia Rio: Fuel Filter Replacement
| 1. |
Remove the fuel pump (Refer to “Fuel Pump” in this group).
|
| 2. |
Disconnect the electric pump wiring connector (A) and the fuel
sender connector (B).
|
| 3. |
Remove the head assembly (A) after releasing the cushion fixing
clip (B).
|
| 4. |
Disconnect the fuel tube quick-connectors (C).
|
| 5. |
Remove the fuel sender (A) in the direction of an arrow.
|
| 6. |
Disconnect the fuel tube connector (A).
|
| 7. |
Remove the cut valve (A) after releasing hooks (B).
|
| 8. |
Remove the reservior-cup (B) after releasing the fixing hooks
(A).
|
| 9. |
Release the fixing hooks, and then remove the pre-filter (A) and
the fuel pressure regulator (B).
|
| 10. |
Replace new fuel filter.
1. Head Assembly
2. Electric Pump Motor
3. Fuel Filter
4. Fuel Sender
5. Fuel Pressure Regulator
6. Pre-filter
7. Reservoir cup
|
Fuel Pump Inspection
[Fuel pump]
1.
Turn ignition switch OFF and disconnect the negative (-)battery
cable.
2.
Remove the fuel pump assembly.
...
Filler-Neck Assembly Removal
1.
Open the fuel filler door, and then remove the filler-neck assembly
mounting screws (A).
2.
Disconnect the fuel filler hose (A) ...
See also:
General Service Information
Protection Of The Vehicle
Always be sure to cover fenders, seats, and floor areas before starting
work.
The s ...
Special Service Tools
Tool(Number and Name)
Illustration
Use
Deployment tool
0957A-34100A
Airbag deployment tool.
Deployment adapter
0957A-3Q100
...
Auto Light Sensor Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the photo & auto light sensor (A) from crash pad upper
side by using screw ( ...
Copyright © www.kirmanual.com 2014-2024