1. |
Turn ignition switch OFF and disconnect the negative (-)battery
cable.
|
2. |
Remove the fuel pump assembly.
|
3. |
Check motor operation by fuel pump connector (A) connecting power(No.2)
and ground(No.4)
|
1. |
Using an ohmmeter, measure the resistance between terminals 1
and 3 of sender connector (A) at each float level.
|
2. |
Also check that the resistance changes smoothly when the float
is moved from "E" to "F".
|
Special Service Tools
Tool(Number and Name)
Illustration
Use
Deployment tool
0957A-34100A
Airbag deployment tool.
Deployment adapter
0957A-3Q100
...
Identification Number Locations
...
Front Seat Belt Replacement
Front Seat Belt Replacement
•
When installing the belt, make sure not to damaged the
...